Loading Cut Sheet With A Length Of A4/Letter, A3/Us B, And Super A3/B - Epson Stylus PRO 10000CF Startup Manual

6. Press the Pause button.
The print heads move and the sheet feeds automatically into
the printing position. READY appears on the LCD panel.
Note:
Even if you do not press the Pause button, the print heads move
and paper feeds into the printing position automatically. READY
appears on the LCD panel.
Now you are ready to print on cut sheet media. Make the printer
driver settings, then send the print job. See "Printing From Your
PC" on page 4-2 or "Printing From Your Macintosh" on page 4-8.
Note:
Allow time for the ink to dry thoroughly after printing to ensure the
printout quality.
Loading cut sheet with a length of A4/Letter,
A3/US B, and Super A3/B
To load cut sheet media with a length of A4/Letter, A3/US B, and
Super A3/B, follow the steps below.
c
Caution:
As much as possible, keep your fingers off the printable surface
of the media, as fingerprints may reduce printout quality.
1. Make sure that the printer is on and the roll paper cover is
closed.
2. Press the Paper Source button repeatedly until the Sheet
light comes on.
Installing the Ink Cartridges and Loading Paper
1
1-13