Using A Usb Connection (For Windows Me, 98, And 2000); Installing The Printer Software On Your Pc - Epson Stylus PRO 10000CF Startup Manual

3. Plug the other end of the cable into the computer's parallel
port.
See "Installing the Printer Software on Your PC" on page 2-4 for
instructions on installing the printer software. You must install
the printer software before using your printer.
Using a USB connection (For Windows Me, 98,
and 2000)
To connect the printer to a USB port, you need a standard shielded
USB cable. Follow the steps below to connect the printer to your
computer.
Note:
The EPSON Printer Port and DMA transfer features (For Windows 98
and 95 only) of the EPSON printer driver you install are not available
with USB connections. They are available only with the parallel interface
connection. For information on the EPSON Printer Port and DMA
transfer, see your Reference Guide in the Online Guide.
Setting up the Printer with Your PC
2
2-3