Loading Cut Sheets With A Length Of 483 Mm - Epson Stylus Pro 7500 Reference Manual

Note:
Even if you do not press the Pause button, the print heads move,
the paper automatically feeds into the printing position. READY
appears on the LCD panel.
7. Make the printer driver settings (see "Accessing the Printer
Software" on page 2-2), then send a print job from the
computer. The printer starts printing.
Note:
Make sure that the Paper Source setting in the printer driver
matches the paper loaded in the printer.
8. When printing is complete, the printer supports the printed
media, and PAPER OUT is displayed on the LCD panel. To
remove the paper, hold it while pressing the Paper Feed (-)
button. The paper can be removed from the printer.
Loading cut sheets with a length of 483 mm (long
edge of Super A3/B) or shorter
To load cut sheet media with a length of 483 mm or shorter, follow
the steps below.
Caution:
c
As much as possible, keep your fingers off the printable surface
of the media, as fingerprints may reduce printout quality.
1. Make sure that the printer is on and the roll paper cover is
closed.
2. Press the Paper Source button repeatedly until the Sheet
light comes on.
Paper Handling
4-17