Epson Stylus PRO 10000CF Startup Manual page 28

6. Hold the ink cartridge with arrow mark on the left side and
pointing to the rear of the printer, and insert it into the slot.
Be sure to match the colors of the seal of compartment and the
cartridge you are replacing.
7. Close the cartridge clamp backwards. Make sure the
corresponding Ink Out light goes off. Repeat step 5 to 6 for
the other five color ink cartridges.
8. Close the Ink compartment cover.
After installing all six ink cartridges, the printer begins
charging the ink delivery system and the Pause light flashes
(for about 4 minutes). When the ink delivery system is
charged, the Pause light stops flashing.
c
1-4
Installing the Ink Cartridges and Loading Paper
Caution:
Never do the following while the Pause light is flashing;
otherwise damage may occur:
Turn off the printer
Open the lower cover
Open the ink compartment cover
Move the paper set lever to the released position
Unplug the power cord