Loading Cut Sheet Media Longer Than 279 Mm (Long Edge Of Letter Size) - Epson Stylus PRO 10000CF Startup Manual

Loading cut sheet media longer than 279 mm
(long edge of letter size)
To load cut sheet media longer than 279 mm, follow the steps
below.
c
Caution:
As much as possible, keep your fingers off the printable surface
of the media, as fingerprints may reduce printout quality.
1. Make sure that the printer is on and the roll paper cover is
closed.
2. Press the Paper Source button repeatedly until the Sheet
light comes on.
3. Make sure the Operate light and Pause light is not flashing,
then set the paper set lever to the released position. The Paper
Out light turns on and LOAD PAPER appears on the LCD panel.
c
Caution:
Do not move the paper set lever while the Operate light or
Pause light is flashing. Doing so may damage the printer.
Installing the Ink Cartridges and Loading Paper
1
1-11