Epson Stylus PRO 10000CF Startup Manual page 38

3. Make sure that the paper set lever is in the secured position.
Then load the sheet into the paper insertion slot until it meets
resistance. Make sure that the right edge of the paper is
straight and in line with the right edge of the scale on the roll
paper cover. PRESS PAUSE BUTTON appears on the LCD panel.
4. Press the Pause button.
The print heads move and the sheet automatically feeds into
the printing position. READY appears on the LCD panel.
Now you are ready to print on the cut sheet media. Make the
printer driver settings, then send a print job. See "Printing From
Your PC" on page 4-2 or "Printing From Your Macintosh" on page
4-8.
When printing is complete, the printer supports the printed
media, and PAPER OUT is displayed on the LCD panel. To remove
the paper, hold it while pressing the Paper Feed button. The
paper can be removed from the printer.
1-14
Installing the Ink Cartridges and Loading Paper