Setting Up Your Printer On A Network - Epson Stylus PRO 10000CF Startup Manual

2. Select the appropriate Background Printing radio button to
turn background printing on or off.
With background printing on, you can use your Macintosh
while it is preparing a document for printing. In order to use
the EPSON Monitor3 utility to manage print jobs, background
printing must be turned on.
3. Close the Chooser.
For information on opening and using the printer software, see
"Printing From Your Macintosh" on page 4-8. If you use your
printer on a network, see "Setting up Your Printer on a Network"
on page 3-7.

Setting up Your Printer on a Network

This section tells you how to set up the printer for use on an
AppleTalk network. By setting up your local printer as a shared
printer, it becomes connected to the network and can be used by
other computers.
First, you need to setup the printer as a shared printer on the
computer to which it is connected. Then, you must specify the
network path to the printer from each computer that will use it,
and install the printer software on those computers.
Setting up the Printer with Your Macintosh
3
3-7