Available Optional Interface Cards; Installing The Optional Interface Card - Epson Stylus PRO 10000CF Startup Manual

Available Optional Interface Cards

The optional Ethernet Interface Cards shown below let you use
your printer on a network. The Ethernet card automatically
detects the protocols on your network, so you can print from
Windows Me, 98, 95, 2000, NT 4.0, and Macintosh on an
AppleTalk network.
EPSONNet 10/100 BASE TX Int. Printer Server
IEEE 1394 I/F card
Note:
The asterisk in the product number is a substitute for the last digit which
varies by country.

Installing the Optional Interface Card

To install an optional interface card, follow these steps:
Note:
Before you install the optional interface card, see the documentation that
comes with the card for setup information.
1. Make sure the printer is turned off.
2. Make sure that the power cord is unplugged from the
electrical outlet.
w
3. Disconnect the existing interface cable, if necessary.
6-2
Using an Optional Interface Card
Warning:
Do not install the interface card when the printer is
connected to an electrical outlet, as damage may occur.
C82384
C82372