Epson Stylus PRO 10000CF Startup Manual page 71

10. Select the type of paper you loaded in the printer from the
Paper Source list.
11. Select the paper size you loaded in the printer from the Paper
Size list.
Note:
Most Windows applications feature paper size settings that override
similar settings in the printer driver.
12. When roll paper is used, set the Roll Paper Option as required.
Auto Rotate (unavailable for Roll Paper [Banner])
If your document length is shorter than the printable width
of the roll paper, the document will be turned automatically
by 90 degrees and printed crosswise when you select Auto
Rotate. You can save paper by using this function.
Auto Cut
Roll paper will be cut automatically after printing one page
when you select Auto Cut.
Print Page Line
Page lines will be printed on the right side and below the
document for manual cutting when you select Print Page
Line.
Save Roll Paper (available only for Roll Paper [Banner])
Select this check box when you wish to save roll paper. The
blank portion of the last page of your document is not fed
through the printer.
13. Make settings for Orientation, Copies, and Printable Area.
Printing and Printer Management
4
4-5