Loading Cut Sheet Smaller Than A3 Size - Epson Stylus Pro WT7900 User Manual

Epson Stylus Pro WT7900/7910
Loading cut sheet smaller than
A3 size
A
Turn on the printer by pressing the
B
Press the button repeatedly until Sheet
appears.
C
Make sure that the roll paper cover is closed.
User's Guide
Paper Handling
button.
39
D
Load the sheet into the paper insertion slot
until it meets resistance.
Align the right edge of the paper with the
setting position, and then insert the paper until
it meets resistance. When using paper sizes A4
or below, load the paper until it reaches the
bottom along the line on the metal part under
the paper insertion slot.
PRESS THE BUTTON appears on the LCD
panel.
Note:
Load the sheet vertically, like most magazines.
E
Press the button.
The paper moves to the start position.
F
If ARE THESE SETTINGS OK? is displayed on
the LCD panel, press the
select NO and then press the
the media type and paper remaining, and then
press the button to load the media.
The previous settings are displayed on the LCD
panel. If the media type and paper remaining
are correct, select YES and then press the
button.
or button to
button. Set