Loading Cut Sheet With A Length Of 483 Mm (Long Edge Of Super A3/B) Or Shorter - Epson Stylus Pro 7500 Startup Manual

Loading cut sheet with a length of 483 mm (long
edge of Super A3/B) or shorter
To load cut sheet media with a length of 483 mm or shorter, follow
the steps below.
c
Caution:
As much as possible, keep your fingers off the printable surface
of the media, as fingerprints may reduce printout quality.
1. Make sure that the printer is on and the roll paper cover is
closed.
2. Press the Paper Source button repeatedly until the Sheet
light comes on.
3. Make sure that the paper set lever is all the way up. Then load
the sheet into the paper insertion slot until it meets resistance.
Make sure that the right edge of the paper is straight and in
line with the right edge of the scale on the roll paper cover.
PRESS PAUSE BUTTON appears on the LCD panel.
Printing and Printer Management
2
2-13