System Requirements - Epson Stylus PRO 10000CF Startup Manual

To use your printer with a PC
To use your printer, you need Microsoft
Edition, 98, 95, 2000, and NT
parallel cable. If you want to connect your printer to a USB port,
you need a Windows Me, 98, or 2000 pre-installed PC equipped
with a USB port; and a shielded USB cable.
Minimum system
Pentium for Windows 98, 95, and NT 4.0
Pentium 133 MHz for Windows 2000
Pentium 150 MHz for Windows Me
32 MB RAM for Windows Me, 98, 95, NT 4.0
64 MB RAM for Windows 2000
100 MB hard disk space for Windows Me, 98,
95, 2000, and NT 4.0
VGA monitor
*1 is for graphic data use
*2 is for line data use
Your computer dealer can help you update your system if it does
not meet these requirements.

System Requirements

®
Windows
®
4.0; and a shielded, twisted-pair
Recommended
system
Pentium II 400 MHz or
higher processor
128 MB RAM or more
500 MB*
more free disk space
(B0)
VGA or better monitor
®
Millennium
1 2
/300 MB* or
iii