Printing In The Pcl5/Pcl6 Mode Problems; The Printer Does Not Print; The Printer Does Not Print Correctly In The Pcl Mode; The Font On The Printout Is Different From That On The Screen - Epson AcuLaser C9200 Series User Manual

Printing in the PCL5/PCL6 Mode Problems

The problems listed in this section are those that you may encounter when printing in the PCL5/
PCL6 mode. All procedural instructions, refer to the PCL5/PCL6 printer driver.

The printer does not print

Cause
The Print to file check box is selected in the Print
dialog box.

The printer does not print correctly in the PCL mode

Cause
(PCL5c mode only) Graphics Mode may be set to
HP-GL/2 and the printing data may include the data
that cannot be printed in the setting.
Scaling is done when printing with download fonts.

The font on the printout is different from that on the screen

Cause
The EPSON screen fonts are not installed.

The edges of texts and/or images are not smooth

Cause
The resolution is set to Fast (300 dpi).
EPSON AcuLaser C9200 Series
What to do
Clear the Print to file check box in the Print dialog box.
What to do
Access the printer driver, click the General tab, click Options, then
select Raster as Graphics Mode.
Access the printer driver, click the General tab, click Options, then
select Raster as Graphics Mode. Select None from the TrueType
Font Download drop-down list.
What to do
The screen fonts must be installed on the computer that you are
using. Otherwise, the font that you select is substituted by some
other font for display on the screen.
What to do
Access the printer driver, click the Print Quality tab, then select Fine
(600 dpi) as the resolution.
User's Guide
Troubleshooting 214