For Long Distances - Epson AcuLaser C9200 Series User Manual

A Printer Stand adds 8.9 cm to the bottom of the printer.
In addition to space considerations, always heed the following precautions when finding a place to
locate the printer:
❏ Place the printer where you can easily unplug the power cord.
❏ Keep the entire computer and printer system away from potential sources of interference, such
as loudspeakers or the base units of cordless telephones.
❏ Avoid using an electrical outlet that is controlled by wall switches or automatic timers. Accidental
disruption of power can erase valuable information in your computer's and printer's memory.
Caution:
c
❏ Leave adequate room around the printer to allow for sufficient ventilation.
❏ Avoid locations that are subject to direct sunlight, excessive heat, moisture, or dust.
❏ Avoid using outlets that other appliances are plugged into.
❏ Use a grounded outlet that matches the printer's power plug. Do not use an adapter plug.
❏ Only use an outlet that meets the power requirements for this printer.

For long distances

Repacking the printer
If you need to transport your printer for long distances, carefully repack it using the original box and
packing materials.
1. Turn off the printer and remove the following items:
❏ Power cord
❏ Interface cables
❏ Loaded paper
❏ Installed options
❏ Toner cartridges
❏ Photoconductor units
EPSON AcuLaser C9200 Series
Cleaning and Transporting the Printer
User's Guide
180