Table of Contents
Advertisement
Internal laser radiation
There is a Class III b Laser Diode Assembly that has an invisible laser beam inside the printer head
unit. The printer head unit is NOT A SERVICE ITEM, therefore, the printer head unit should not
be opened under any circumstances. An additional laser warning label is affixed to the inside of the
printer.
Ozone safety
Ozone emission
Ozone gas is generated by laser printers as a by-product of the printing process. Ozone is produced
only when the printer is printing.
Ozone exposure limit
The Epson laser printer generates less than 3 mg/h of continuous printing.
Minimize the risk
To minimize the risk of exposure to ozone, you should avoid the following conditions:
❏ Use of multiple laser printers in a confined area
❏ Operation in conditions of extremely low humidity
❏ Poor room ventilation
❏ Long, continuous printing together with any of the above
Printer location
The printer should be located so that the exhaust gases and heat generated are:
❏ Not blown directly into the user's face
❏ Vented directly out of the building whenever possible
Power On/Off Cautions
Do not turn off the printer:
❏ After turning on the printer, wait until Ready appears on the LCD panel.
EPSON AcuLaser C9200 Series
Safety Instructions
User's Guide
19
Advertisement
Table of Contents
