Table of Contents
Advertisement
2. Open cover B.
3. Unlock the release levers as shown below.
* release position
Warning:
w
Unless specifically instructed in this guide, be careful not to touch the fuser, which is marked
CAUTION HIGH TEMPERATURE, or the surrounding areas. If the printer has been in use,
the fuser and the surrounding areas may be very hot. If you must touch one of these areas,
wait 30 minutes to allow the heat to subside before doing so.
EPSON AcuLaser C9200 Series
Troubleshooting
User's Guide
*
186
Advertisement
Table of Contents
