Using The Reserve Job Function - Epson AcuLaser C9200 Series User Manual

After you install EPSON Web-To-Page, the menu bar is displayed on the Microsoft Internet Explorer
Toolbar. If it does not appear, select Toolbars from the View menu of Internet Explorer, and then
select EPSON Web-To-Page.

Using the Reserve Job Function

This function allows you to store print jobs on the printer's memory and to print them later directly
from the printer's control panel. You can prevent the printed document from being looked at by
other people by applying a password to the print job.
This function uses the following types of printer memory.
Printer's Storage
CompactFlash
RAM Disk
The table below gives an overview of the Reserve Job options.
Reserve Job Option
Re-Print Job
Verify Job
*
Stored Job
Description
The optional CompactFlash memory must be installed on your printer in order to use
the Reserve Job function. Make sure that the CompactFlash memory is correctly
recognized by the printer driver before you start using the Reserve Job function.
You need to keep sufficient RAM disk capacity in order to use the Reserve Job
function.
To enable the RAM disk, you have to set the RAM Disk setting on the control panel to
Normal or Maximum. For instructions about increasing your printer's memory, see
"Installing a memory module" on page 150.
After the memory module is installed, you must update the option information. See
"Making Optional Settings" on page 217.
When both CompactFlash memory and a RAM disk are installed, CompactFlash
memory is given priority and makes the RAM disk unavailable.
Description
Lets you print the job now and store it on the printer's memory. You can print the same
job several times.
Lets you print one copy now to verify the content. You can print multiple copies later.
Lets you store the print job on the printer's memory without printing it now.
EPSON AcuLaser C9200 Series User's Guide
Printing Tasks 76