An Undefined Error Occurs (Macintosh Only); Printing In The Pcl6/Pcl5 Mode Problems; The Printer Does Not Print; The Printer Does Not Print Correctly In The Pcl Mode - Epson Aculaser M2000 series User Manual

An undefined error occurs (Macintosh only)

Cause
The version of the Mac OS that you are using is
unsupported.

Printing in the PCL6/PCL5 Mode Problems

The problems listed in this section are those that you may encounter when printing in the PCL6
mode. All procedural instructions, refer to the PCL6 printer driver.

The printer does not print

Cause
The Print to file check box is selected in the Print
dialog box.

The printer does not print correctly in the PCL mode

Cause
(PCL6 mode only) Graphics Mode may be set to
Vector and the printing data may include the data
that cannot be printed in the setting.

The printer does not start manual duplex printing (PCL6 only)

Cause
The Print directly to the printer check box is not
selected.
The Network port is selected.

The font on the printout is different from that on the screen

Cause
What to do
This printer's driver can only be used on Macintosh computers
running Mac OS X version 10.2.8 or later.
What to do
Clear the Print to file check box in the Print dialog box.
What to do
Access the printer driver, click the Graphics tab, click Options,
then select Raster as Graphics Mode.
What to do
Select the Print directly to the printer check box on the Details
tab.
Change the port to either LPT or USB. The page order for duplex
printing will be corrected.
What to do
Troubleshooting 110