Steps To Using Selectype - Epson Action Laser II User Manual

Steps to using SelecType

There are five basic steps to using SelecType:
1. Enter SelecType mode.
2. Move to the option you want.
3. Set, select, or execute the option.
4. Save the new setting, if necessary.
5. Exit SelecType mode.
You'll see how to complete each step on the following pages. This
section uses the SelecType Level 1 INPUT option to explain the steps
to using SelecType. You may want to try each step as you read it for
hands-on practice.
Enter SelecType mode
SelecType has two levels, Level 1 and Level 2. To enter Level 1 press
SelecType
the
to enter Level 2 hold the button down longer until SelecType
LEVEL2 appears.
SelecType
Press
Then one of the Level 1 main menu options appears.
Move to the desired option
After the SelecType Level 1 or Level 2 display appears, you see one
of the main menu options. To look at the other options at this level,
use the and
Note: If you are using the INDIVIDUAL setting, you choose a
channel before this step.
button until SelecType LEVEL1 appears on the display;
until SelecType LEVEL1 appears on the display.
buttons.
Using SelecType
SelecType
4 - 7