Using The Font Cartridges; Inserting A Font Cartridge - Epson Action Laser II User Manual

Using the Font Cartridges

Inserting a font cartridge

You insert a font cartridge into the slot on the front of the printer.
CAUTION:
Never insert or remove a cartridge while the printer is
on line, in SelecType mode, or while the printer is
resetting (after you press
Be careful when you insert or remove a font cartridge.
You can damage the cartridge by trying to insert it the
wrong way or by using too much force.
1. Make sure that the printer is not in one of the following
conditions:
The FEED
through the currently selected interface).
You are setting parameters using SelecType.
The display shows the RESET message.
If the
2. FEED
then press
3. Make sure the printer is off line (the
off the printer.
B-4 Font Cartridges
light is flashing fast (the printer is receiving data
light is on, press
to print any data remaining in the buffer.
FEED
RESET).
to take the printer off line;
ON LINE
ON LINE
light is off) or turn