Choosing A Font; Hp Emulation Mode - Epson Action Laser II User Manual

Choosing a Font

The FONT option is different for each printer mode. This section
describes the available submenus of the FONT option in each mode.
You can use the level 1 FONT SAMPLE option as described earlier to
print out a list of the available fonts.
Note: You will almost always use your application software, not
SelecType to select fonts.

HP emulation mode

When you are in the LJ-2P mode, the FONT option display shows:
RD-
FONT
Press to enter the FONT option.
You first choose the font source. The three possible choices are listed
below:
*RD Resident font
Font cartridge slot
C
DL Downloadable soft font
Only available options appear on the display. Option C is available
only if you insert a cartridge in the cartridge slot. The DL option
appears only when a font has been downloaded from your
computer. See Appendix C for a description of the resident HP fonts.
SelecType
4-34
0