Troubleshooting Information; Shown Below - Epson Action Laser II User Manual

3. Press until STATUS SHEET appears on the display.
4. Press twice to print the status sheet. A sample printout is
D

shown below.

Printer Configuration
Installed Memory : 3.OMbytes
CH Mode
Auto Continue
Standby
CH : P
Mode
I/F : PARALLEL
PARALLEL (CH P)
SLCTIN
SERIAL (CH S) : RS232C
Word Length(bit) : 8
Stop Bit
DSR
Receive Buffer
Mode Configuration
Input Tray
Copies
Sub Configuration
Form Length
System Configuration
Top Offset
Full Print
Load Macro
Note: The status sheet prints the printer's current settings,
including any new macro settings. See Chapter 4 for information
on macro settings.
5. Press the SelecType button twice to exit SelecType.
If the status sheet does not print properly, see Chapter 7 for

troubleshooting information.

STATUS SHEET
: AUTO-SENSE
: OFF
: DISABLE
: LJ-2P
: OFF AUTOFEED
Baudrate(bps) : 9600
: 2 DTR
: OFF
CTS
: 1kbytes
: AUTO Font
: l Orientation : PORT
: 60 Symbol Set
: 0
: 0
: 0
Testing and Connecting Your Printer
Controller Version : 15.04
CH Time out
Total Printed Count: 25
Version
: OFF
BUSY Delay(µs) : 0
Parity
: ON XON/XOFF
:
ENQ/ACK
OFF
: RD-0 Paper size
: Roman-S
Left Offset
Memory Left
Power On Macro : 0
Testing the Printer
EPSON
: 28
: 17.04
: NONE
: ON
: OFF
: LETTER
: 0
: 2949Kbytes
2-9