Optional Epson Gl Identity Card; Compatible Cards; Caring For Cards - Epson Action Laser II User Manual

Optional Epson GL Identity Card

The Epson GL Identity card allows you to install the Epson GL
printer mode on your printer. The printer has one slot for identity
cards.
The optional Epson GL Identity card requires a minimum of 1MB
additional memory. To add memory, see page A-13.

Compatible cards

In addition to the Epson GL Identity card, other cards may be
available for use with your printer. Check with your dealer for a list
of the cards.

Caring for cards

When you use cards, follow these precautions:
Do not drop, crush, or bend cards. The card's natural curvature
does not affect its operation, so do not try to straighten a card by
bending it.
Avoid touching the small gold connectors (contacts) along the
card's edge.
If the card becomes dirty, clean the connectors by wiping the
edge with a clean tissue. Do not use water, alcohol, or other
solvents to clean the card.
Keep cards in their slip cases and blue anti-static bags when you
are not using them.
Do not store cards in direct sunlight or near a source of heat.
Cards can withstand temperatures ranging from -30°C to 65°C
(-20°F to 150°F) and can tolerate up to 90% humidity.
Be careful when you insert and remove a font card. You can
damage it by attempting to insert it the wrong way or by using
too much force.
Options A-21