Removing A Font Cartridge - Epson Action Laser II User Manual

Removing a font cartridge

CAUTION: Never remove a font cartridge while the
printer is on line, in SelecType mode, or while the printer
is resetting. If you remove a card while the printer is in one
of these states, a REINSERT CARD message appears on
the display. An error also occurs if you remove a cartridge
while the
the description of card error messages in Chapter 7 for
more information.
1.
Make sure that the printer is not in one of the following
conditions:
The FEED
through the currently selected interface).
You are setting parameters using SelecType.
The display shows the RESET message.
2. If the
FEED
then press
Make sure the printer is off line (the
3.
off the printer.
light is on, even if the printer is off line. See
FEED
light is flashing fast (the printer is receiving data
light is on, press
to print any data remaining in the buffer.
FEED
to take the printer off line;
ON LINE
ON LINE
Using the Font Cartridges
light is off) or turn
Font Cartridges B-7