Paper Jam - Epson Action Laser II User Manual

Paper Jam Problems
3. Make sure that the paper is evenly aligned in the multi-media
feeder and that the paper rests below the multi-media feeder's
maximum paper marks. Then replace the multi-media feeder.
4. Make sure that you are using the correct paper size in the multi-
media feeder. See the section on using the optional multi-media
feeder in Appendix A for more information.
Note: Make sure you are using paper that meets the specifications
for this printer. See Chapter 5 for the correct paper to use.

PAPER JAM

The message PAPER JAM indicates that there is a paper jam either in
the paper input path or the paper eject area.
1. Open the printer cover.
WARNING: Opening the printer exposes the fuser, which
is marked by a
to touch the fuser.
7-12 Troubleshooting
CAUTION: HOT SURFACE
label. Be careful not