Lq And Fx Emulation Modes - Epson Action Laser II User Manual

After you choose the font source, you choose the font by number
based on the font source option selected above. Only fonts that
match the current orientation setting can be selected. If you change
the SYMSET or ORIENT settings, the available font numbers may
change. To save a selected font as the default font, use the SAVE
MACRO option in the Level 1 SYSTEM CONFIG menu.

LQ and FX emulation modes

When you use either the LQ or FX emulation mode, the FONT
option display shows:
FONT
Courier
* Courier
Prestige
DL
The factory setting is Courier. After selecting the desired font, you
can adjust the character spacing and size of the font with the PITCH
and CONDENSED settings in the SUB CONFIG option.
Note: Resident and optional fonts specifically designed for the HP
emulation mode cannot be used in the LQ or FX modes.
Choosing a Font
SelecType 4-35