Selecting And Printing A Status Sheet Or Test Print - Epson Action Laser II User Manual

Testing the Printer

Selecting and printing a status sheet or test print

To select and print a status sheet or test print, you must enter
SelecType. The printer has two SelecType levels; the status sheet
feature is in SelecType Level 1 and the test-print feature is in Level 2.
The level selected depends on the amount of time you hold down
the SelecType button.
Note: For a complete description of SelecType levels and
functions, including Level 2 test prints, see Chapter 4. You may
also use the Quick Reference card located at the back of this
manual.
Selecting and printing a status sheet
A status sheet lists the current printer settings.
1. Make sure that your printer is turned on.
2. Press the SelecType button until SelecType LEVEL1 appears.
Note:
If you have used SelecType before, and if the printer is set up
to use more than one channel, the following option appears on
the display at step 2:
Press
step 3.
2-8 Testing and Connecting Your Printer
CANCEL : < S :
or to choose your channel. Then go on to
P: O : >