Inserting A Card - Epson Action Laser II User Manual

Optional Epson GL Identity Card

Inserting a card

You can insert a card into the slot on
CAUTION:
Never insert or remove a card while the printer is
on
resetting (after you press
Be careful
damage
or by using too much force.
1. Make sure that the printer is not in one of the following
conditions:
The
FEED
through the currently-selected interface.)
You are setting parameters using SelecType.
The display shows the RESET message.
the
2. If FEED
print any data remaining in the buffer.
FEED to
3. printer off line (make sure the
Set the
off the power.
4. Hold the card so that the large
arrow is pointing toward the slot.
A-22 Options
line, in SelecType mode, or while the printer is
you insert or remove a card. You
when
card by trying to insert it the wrong way
the
light is flashing fast. (The printer is receiving data
light is on, make sure the printer is off line and press
right side of the printer.
the
RESET).
ON LINE
logo faces up and the
EPSON
can
light is off) or turn