Steps To Using Selectype - Epson EPL-7500 User Manual

Use the arrow buttons to move through menus and to
display and select SelecType options. They are active only when
you are in SelecType mode. Pressing them at any other time
sounds three beeps.
Note: If you press an arrow that is invalid, the printer beeps
three times and does not change the display.

Steps to using SelecType

There are five steps to useing SelecType:
1. Enter SelecType mode.
2. Move to the option you want to select.
3. Select the option.
4. Save the new setting, if necessary.
5. Exit SelecType mode.
You'll see how to complete each step on the following pages. This
section uses the SelecType Level 1 OUTPUT option to explain the
steps to using SelecType. You may want to try each step as you
read it for hands-on practice.
Enters a submenu or selects an option or an
action.
Backs up through the options to the main
menu.
Displays options in the same menu. You can
view the options one at a time by pressing the
buttons.
Using Selec Type
S e l e c T y p e 3 - 5