Testing The Printer; Turning On The Printer - Epson Action Laser II User Manual

Testing the Printer

The printer has three built-in print tests: the status sheet and two test
prints. These tests let you check the operation of your printer and
obtain information on printer settings.
Before running a test, make sure you have removed all packing
materials from the printer, as described in Chapter 1, and that you
have installed all printer parts. You do not need to connect the
printer to your computer to run these tests.

Turning on the printer

Turn on the power by pressing the power switch located on the top
left comer of the printer. The printer is on when the vertical line ( I )
is pressed down. The control panel lights turn on briefly.
Note: If a FEED JAM message appears on the control panel,
remove the paper cassette and any paper in the printer. Next,
open and close the printer cover. Then replace the paper cassette.
2-6 Testing and Connecting Your Printer