Upper Case Removal - Epson 4003353 Service Manual

Terminal printer
Table of Contents

Advertisement

Disassembly and Assembly

Upper Case Removal

3.2.1
1.
Remove the printer cover by releasing the 2 tabs holding it to the upper case.
2. Remove the paper support by releasing the 2 tabs
Remove the paper guide
center while you pressing the =rriage lock lever.
the carriage to the
upper case, as shown in ,the figure below.) At this time, discon.ne~ fie connector on the CIW'
Figure 3-2. C137 PNL
6. Release 1 tab by inserting a flathead screwdriver into the holes at the bottom of the lower case,
as shown in the figure below.
7. Remove the uppercase by lifting the front side.
B]
Hold the upper casej%nly and pull
3-3
Control Panel
Figure 3-3. Upper Case Removal
Stylus Color Service Manual
Removal
Rev. B

Advertisement

Table of Contents
loading

This manual is also suitable for:

Stylus color series

Table of Contents