Epson Stylus Photo - Ink Jet Printer Quick Setup Manual
  1. Manuals
  2. Brands
  3. Epson Manuals
  4. Printer
  5. Stylus Photo - Ink Jet Printer
  6. Quick setup manual
Epson Stylus Photo - Ink Jet Printer Quick Setup Manual

Epson Stylus Photo - Ink Jet Printer Quick Setup Manual

User setup information
Hide thumbs Also See for Stylus Photo - Ink Jet Printer:
Table of Contents

Advertisement

Quick Links

Download this manual See also: User Manual, Product Information Manual
Here's how to set up your new EPSON
printer . . .

Unpack the Printer

Remove any packing material from the printer, as described on
the Notice Sheet in the box. Save all the packaging so you can
use it if you need to transport the printer later. You'll find these
items inside:
paper
support
Place the printer flat on a stable desk near a grounded outlet.
Leave plenty of room in back for the cables and enough room
in front for opening the output tray.
Do NOT put the printer:
In an area with high temperature or humidity
In direct sunlight or dusty conditions
Near sources of heat or electromagnetic interference, such
as loudspeakers or cordless telephone base units.
Also, be sure to follow the Safety Instructions in the
Introduction of your User's Guide.

Quick Setup

black ink
cartridge
®
Stylus Photo
color ink
cartridge
4007082

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Stylus Photo - Ink Jet Printer and is the answer not in the manual?

Questions and answers

Related Manuals for Epson Stylus Photo - Ink Jet Printer

Summary of Contents for Epson Stylus Photo - Ink Jet Printer

  • Page 1: Quick Setup

    Quick Setup ® Here’s how to set up your new EPSON Stylus Photo printer . . . Unpack the Printer Remove any packing material from the printer, as described on the Notice Sheet in the box. Save all the packaging so you can use it if you need to transport the printer later.

  • Page 2: Attach The Paper Support

    Attach the Paper Support Insert the paper support in the top slot on the back of the printer. Plug In the Printer First make sure the power is off. power Caution: Do not plug the printer into an outlet controlled by a wall switch or timer, or on the same circuit as a large appliance.

  • Page 3: Install The Ink Cartridges

    Install the Ink Cartridges Lower the output tray and raise the printer cover. Press the power button to turn on the printer. The power light flashes, the ink out lights come on, and the ink cartridge holders move to the installation position. Pull up the two ink cartridge clamps.
  • Page 4 5. Lower the ink cartridges into their holders with the labels face up and the arrows pointing toward the back of the printer. black ink Warning: cartridge If ink gets on your hands, wash them color ink thoroughly with soap cartridge and water.

  • Page 5: Load The Paper

    Load the Paper 1. Slide the left edge guide all the way left and pull out the output tray extensions. Note: Keep unused paper in its original packaging and store it in a cool, dark place. 2. Fan a stack of plain paper and then even the edges. 3.

  • Page 6: Check The Printer

    Chapter 6 in your User’s Guide for more information. Connect the Printer to Your Computer ™ ® You can connect your EPSON Stylus Photo to either an IBM ® ® compatible PC or an Apple Macintosh .

  • Page 7: Connecting To A Macintosh

    Do not install a driver and click OK. software on diskettes or download it through your 2. Insert the EPSON Digital Darkroom CD-ROM in your drive. modem. Check out The EPSON Digital Darkroom main screen appears. EPSON’s Home Page at http://www.

  • Page 8: Selecting Your Printer

    4. If you’re using the printer port on your Macintosh, make sure AppleTalk is inactive. EPSON is a registered trademark and EPSON Stylus is a trademark of SEIKO EPSON CORPORATION. General Notice: Other product names used herein are for identification purposes only and may be trademarks of their respective owners.

This manual is also suitable for:

Stylus photo series

Table of Contents