Preventive Maintenance - Epson 4003353 Service Manual

Stylus Color Service Manual

6.1 PREVENTIVE MAINTENANCE

Although this printer is designed so that no specific maintenance is required on a regular basis, it is
recommended that you clean the printer thoroughly whenever you get a chance to do so. You can
clean:
Outer case
Use a soft, clean cloth, dampened with mild detergent, if necessary.
Auto sheet feeder
If the inside of the auto sheet feeder is dirty (dusty), carefully brush away all dust and dirt
using a soft brush. If the pickup roller of the sheet feeder is dirty, clean its surface with a soft,
clean cloth.
Inside the printer
If you notice any dust or dirt that has accumulated inside the printer when you open the outer
case for repair, remove all dust and dirt using a small vacuum cleaner designed for such
purposes.
chemicals can damage the components of the printer.
Do not use a hard or abrasive brush forcleaning.
the folloun'ng instructions when servicing the ~"nter or stoting the after-service parts:
polarity do not come in contact m"th each other.
2. Do not heat the battey and place it near fi"re.
3. Do not solder on any part of the battey. (Doing so may result in leakage of electrolyte
from the battery, bumin~ explosion. The leakage may damage devices close to the
battery.)
4. Do not change the battey. (An eqrlosivegas may be generated im"de the battery, and
cause burning or explosion.)
5. Do not dismantle the battey. (The gas inside the battery may hurt your throat. Leakage,
burning, or explosion may also result.)
6. Do not install the battery in the wrong direction. (This may cause burning or explosion.)
Rev. A