Epson 4003353 Service Manual page 93

Adjustment
angular spacer for the color head come in five thicknesses, each having its own shape. The
The
following figure shows the relation of the shape and the thickness level.
Since the color head is not equipped with
the angular spacer (exclusive use for color head), which is placed under the left side of the base
h e a d .
Angular Spacer (For Color Head)
angular spacer YMC
angular spacer YMC-B
angular spacer YMC-C
angular spacer YMC-D
angular spacer YMC-E
Figure 4-14. Relationship of the Shape and Thickness
4. In Figure 4-13, pay attention to the position of A and B while you reset the left angular spacer.
The replacement procedure is explained beginning in step 5.
I
r
Replace the right
angular spacer
with a thicker one
Turn off the printer at once.
5.
6. Move the carnage to the center manually, and loosen (but do not remove) the screw securing
the color head to the carriage.
Rev. D
a
linear spacer, the angle adjustment is decided only by
Name
Spacer
1
d
Figure 4-15. Spacer Select Judgement
Stylus Color Service Manua/
Thickness Shape
0.30
0.35
0.40
0.45
0.50
Replace the right
angular spacer
with a thinner one
I
4-13