Protect Counter - Epson 4003353 Service Manual

CL Counter K (Monochrome = Kb, CMY= Ky)
2.4.2.6
This counter selects the cleaning
counter KK. The CL CQunter K counts
The cleaning operation is performed.
The ink cartridge is replaced.
2.4.2.7 CL2 Counter KK (Monochrome =
This counter controls the order of

Protect Counter

2.4.2.8
The protect counter A or Ink amount counter R is stored into the EEPROM on the main board, and
while the printer is on, this data is stored into the RAM on the main board.
Protect counter A
1. Power On
2. CL 1:
3. CL 2:
4. CL
3:
5. I/C Replacemen~
6. Fixed time
Fail Absorption:
7. Power ~
(Normal):
Also the protect counter A resets when:
1. The printer is at the dei%ult forwarding.
2. After the maintenarm is performed (when the ink drain tank is replaced).
2-32
mode according to the value of the CL counter K and the CL2
when the cleaning operation is perhmed and it resets where
KKb, CMY= KKy)
mode selection to the followiqg
the cleaning
This counter is used to manage the total amount of drained ink If
the counter value is equal to or exceeds
the error on the control panel and maintenance is required. This
counter is counted by the fbllowing every each sequenms. {( ) means
only the color head, and 1 point= 0.025cc}
40step x q5)
3600 (4800) step
40 step x 12absorption
720 step
7800 (8200) step
8900 (14000) Step
8900 (8800) step
Monochrome and CMY = 2
(4800) step
3600
'This mmnter monitors the amount of ink inside the caps, selects the
absorbing operation mode when the power is turned on, performs
the refresh operation, and standby operatiom
m,
the printer indicates
: 2 point
:3 point
: 5(4) point
: 16(20) point
4
:
: 4 point
: 4opoint
: 4 point
: 4 point
: 4 point
: 16(20) point
: 4 point
>.
Rev. A