Stylus Color Service
Paper Feed Roller
3.2.5.9
1. Remove the printer mechanism. (See section 3.2.4.)
2. Remove the carriage unit. (See section 3.2.5.2.)
3. Remove the pump unit. (Seesection3.2.5.3.)
4. Remove the tension spring holding the tension roller assembly to the sub frame.
5. Remove the tension wire on the side frame (L) holding the tension roller assembly to the side
frame (L).
6. Remove a CBB (M3x8) screw securing the tension roller assembly to the sub frame and remove
the tension roller assembly.
Figure 3=18. Tension Roller Assembly Removal
7.
Release the 2 bushings securing the paper feed roller assembly to both the side frame(L) and
the sub frame. Then remove the paper feed roller assembly.
Figure 3-19. Paper Feed Roller Assembly Removal
Manual
Assembly Removal
Tension Roller Assembly
Paper
Feed Roller Assembly
o
\
II
Tension Spring