Wiping Operation 1; Wipingoperation2; Rubbing Operation; Disengage On Operation - Epson 4003353 Service Manual

Sty/us Color Service Manual
Wiping Operation t
2.4.1.10
operation eliminates dust from the nozzle plate before performing the ink absorption.
This
1. Moves the carriage to the wiping start position.
2. Sets the wiper.
3. Moves the carriage to the wiping end position.
4. Resets the wiper.
5. Moves the carriage to the home position.
2.1.4.11 Wiping Operation 2
This operation eliminates dust or ink from the nozzle plate after performing the ink absorption.
1. Moves the carriage to the wiping start position.
2. Sets
the wiper.
3. Moves the carriage to the wiping end position.
4.
Resets the wiper.
5. Moves the carriage to the home position.
6. Moves the carriage to the flushing position, and performs the flushing operation (color= 7000
pulse).
7. Moves the carriage to the home position.

2.4.1.12 Rubbing Operation

1. Moves the carriage to the rubbing start position.
2. Sets the wiper.
3. Moves the carriage to the rubbing end position.
4. Resets the wiper.
5. Moves the carriage to the home position.

2.4.1.13 Disengage ON Operation

This operation sets the switch lever to the position where it transmits the PF motor drive to the
pump mechanism. It also moves the carriage to the home position where the lever is set to the
specified position.
1. Sets the D/E lever (moves the carriage to the D/Elever set start position).
2.
Performs the PF system compensation.
3. Pauses the printer (waits for the D/E gear to move).
4. Releases the pressure to the D/E holder.
5. Moves the carriage to the home position.
2.4.1.14 Disengage OFF Operation
This operation resets the switch lever to the position where it transmits the PF motor drive to the
pump mechanism. It also moves the mrriage to the flushing position where the lever is reset to the
specified position.
1. PerfOrms the pump system compensation.
2. Pauses the printer.
3. Resets the D/E lever and D/Egear.
Moves the carriage to the home position.
4.
Rev. A
2-29