Epson 4003353 Service Manual page 87

Adjustments
7.
Turn the printer power off at once.
8. Move the carriage to the center
the two ink cartridges.
9. Remove the rubber cap that covering a head screwat a side of color inkcartridge and then
the user. At this time, use the ink cartridges that are exclusive for semice (Monochrome:
1020626, CMY: 1020627). You can re-use the old ink cartridges for other pu~oses.
10. Change the spacer angular(for monochrome head) to new one with referring the figure 47.
(Replace spacer angular while using the tweezers to push the base head toward the rear.)
Rev. D
Figure 4-6. Removing the Rubber Cap
Stylus Color *rvice R&nual
pressing the carriage lock lever, and remove
4-7