Teledyne 6712FR Installation And Operation Manual page 241

DECLARATION OF CONFORMITY
Application of Council Directive:
Equipment Type/Environment:
Standards to which Conformity is Declared:
Standard
EN61000-4-2 Electrostatic Discharge
EN61000-4-3 Radiated RF Immunity
EN61000-4-4 Electrical Fast Transient
EN61000-4-5 Surge on I/O Lines
EN61000-4-6 Conducted RF on AC lines
EN61000-4-11 Voltage Dips/Short Interruptions
CISPR11/ RF Emissions
EN 55011
EN61000-3-2, 3-3 Harmonic, Flicker
We, the undersigned, hereby declare that the design of the equipment specified above conforms to the above Directive(s) and
Standards as of March 6, 2001
Wiliam Foster
USA Representative
William Foster
Director of Engineering
Teledyne Isco, Inc.
4700 Superior Street
Lincoln, Nebraska 68504
Phone: (402) 464-0231
Fax: (402) 464-4543
60-9002-072
Rev B
89/336/EEC – The EMC Directive
73/23/EEC – The Low Voltage Directive
Manufacturer's Name: Teledyne Isco, Inc.
Manufacturer's Address: 4700 Superior, Lincoln, Nebraska 68504 USA
Mailing Address: P.O. Box 82531, Lincoln, NE 68501
Laboratory Equipment for Light Industrial/Commercial Environments
Trade Name/Model No: 6712FR Refrigerated Sampler
Year of Issue: 2001
EN 61010-1
EN 61326:1998 EMC Requirements for Electrical Equipment for
EN60529
Description
Safety Requirements for Electrical Equipment for
Measurement, Control, and Laboratory Use
Control, and Laboratory Use
Degrees of Protection Provided by the Enclosure IP-26
Severity Applied
Level 2 - 4kV contact discharge
Level 3 - 8kV air discharge
80 MHz to 1000MHz 80% AM at 1kHz
Level 1 – 10V/m
Level 2 – 2kV on AC lines
2kV common mode,
differential mode
150 kHz to 80 MHz,
80% modulated
0.5 cycle, each polarity/100%
Group 1, Class A Industrial, Scientific, and
Medical Equipment
Measurement,
Performance Criteria
A
A
A
1KV A
3V rms, A
A