Nickel-Cadmium Battery; Lead-Acid Battery; Ultrasonic Flow Module; Submerged Probe Module, 10 Ft Range - Teledyne 6712FR Installation And Operation Manual

Table 1-3 Technical Specifications for the 6712FR Refrigerated Sampler (Continued)
6712 Controller in Standby
Average Current of Accessories
Controller Display Backlight
701 pH Module
710 Ultrasonic Module
720 Submerged Probe Module
730 Bubbler Module
— at 2 ft of liquid level
— at 10 ft of liquid level
750 Area Velocity Module
780 4-20 mA Module
YSI 600 with pH, DO, Conductivity, and Temperature
Programmable Analog 4-20 mA Output Option
CDMA cellular telephone modem
— standby current
— current while communicating
GSM cellular telephone modem
— standby current
— current while communicating
a. Current ratings when input power is 12.5 VDC and ambient temperature is 77 °F (25 °C)
b. Average current when programmed to take readings at 15 minute intervals.
c. Rating for three outputs.
Sampler Only
Operating Current:
Isco External Battery Capacity:
Sampler Only:
Sampler with pH Module:
Sampler with Ultrasonic Module:
Sampler with Submerged Probe Module:
Sampler with Bubbler Module (1-2 ft head):
Sampler with Area Velocity Module:
Sampler with 4-20 mA Module:
A Standard Sampling Routine is a 200 ml sample taken every hour in 24 bottle mode, with a 10 foot (3 m) vinyl suc-
tion line at 5 feet (1.5 m) of head. The module is set to take a reading every 15 minutes.
Power Consumption
b
b
b
b
b
b
Approximately 30 mA based on 200 ml sample every hour, 10 ft (3 m) suction
line, and 5 ft (1.5 m) suction head.
Number of Complete Standard Sampling Routines

Nickel-Cadmium Battery

6712FR Refrigerated Sampler
a
b
c

Lead-Acid Battery

6
6
6
6
3
4
6
Section 1 Introduction
10 mA
228 mA
11 mA
11 mA
11 mA
24 mA
31 mA
12 mA
10 mA
11 mA
124 mA
35 mA
150 mA
62 mA
230 mA
9
9
9
9
5
6
9
1-9