Setting The Clock And Calendar; Menu Screens: Clock Start Times - Teledyne 6712FR Installation And Operation Manual

6712FR Refrigerated Sampler
Section 3 Programming Introduction
Entering Times and Dates
ENTER TIME AND DATE:
HH:MM DD-MON-YY
__:__ __-__-__
•Move from one field to
another by pressing the
arrow keys.
•Change a setting in a field
by typing a number. Press
to accept the new setting.
3.4.1 Setting the Clock and
Calendar
3.4.2 Menu Screens: Clock
Start Times
3-6
When setting the clock and calendar, use a 24-hour clock for
times and the day-month-year format for dates. The illustration
at the left shows blanks for each position that accepts an entry.
The positions are called fields. When this screen appears on your
sampler, the fields will contain the sampler's current settings for
the time and date.
• To move from one field to another without changing the
setting, press the arrow keys. Use this technique when
↵
you want to change only one or two settings.
• Change the setting by typing a new number. Press ↵ to
accept the new setting.
For example, to enter 2:00 p.m. (2:00 p.m is 14:00 on a 24-hour
clock), type 14. Press ↵. Next, type 0 (zero) for the minutes, and
press ↵. To enter a date, such as January 22, 2001, type:
01 ↵ 01 ↵ .
RUN
PROGRAM
1
VIEW REPORT
OTHER FUNCTIONS
MAINTENANCE
MANUAL FUNCTIONS
2
PROGRAMMING STYLE
SET CLOCK
PUMP TUBE ALARM
3
INTERNAL BATTERY
DIAGNOSTICS
ENTER TIME AND DATE:
HH:MM DD-MON-YY
4
14:00 22-JAN-01
SET CLOCK
PUMP TUBE ALARM
5
INTERNAL BATTERY
DIAGNOSTICS
There are four start time settings you can use in a sampling
program. This section discusses only one of these settings, the
clock start time. A clock start time lets you set up a sampling
program that starts at the same time on one or more days of the
week. For example, you may want to begin sampling at 6:00 a.m.
on Monday through Friday (refer to the screen below).
To select a day or days from the menu:
1. Press an arrow key until the cursor is on the correct day.
Then, press ↵.
2. Repeat these steps until each day you want is blinking.
3. Press an arrow until DONE blinks. Press ↵.
Select OTHER FUNCTIONS.
Select MAINTENANCE.
Select SET CLOCK.
Enter the time and date.
Press Stop to return to the main
menu.
22 ↵