Download  Print this page

Format Memory Card - GE SmartHome Series User Manual

Intellicorder camera system
Hide thumbs

Advertisement

4. Use 
Press OK to enter
5. Use
 to reduce the brightness value
or  to increase it
6. Press OK to confirm the selected quality
and go back to the previous menu. Press
menu to return to live mode.
7. Note: You can press the MENU button
anytime during setting to cancel the selection
and go back to the previous menu
Choose Flicker Option
This setting is for 50Hz/60Hz lighting.
E.g. US: 60Hz
EU: 50Hz
HK: 50Hz
50Hz Flicker
60Hz Flicker
1. Press MENU buttons to enter Menu mode
2. Use
to move to Setup
3. Press OK to enter the setting mode
4. Use
 to move to Flicker option.
Press OK to enter
5. Use 
to select 50Hz or 60Hz depending on your country standards - see above.
6. Press OK to proceed the selection and go back to previous menu
7. Press MENU during setting to cancel the selection and go back to the last menu

Format Memory Card

1. Press MENU to enter Menu mode
2. Use 
3. Press OK to enter the setting mode
4. Use
 to move to Format. Press OK to enter
5. Use
to select Cancel or OK. Press OK
to confirm the selected command
6. Press OK to confirm the selected quality and go
back to the previous menu. Press menu to return to
live mode.
to move to LCD Brightness.
to move to Setup
Adjust LCD
Brightness
25
0.0
-2.0
0
.
50H z Light
F or m a t w ill era se
A ll da ta
C a ncel
O k
2.0
Flic k er

Advertisement

loading