Download  Print this page

GE SmartHome Series User Manual page 22

Intellicorder camera system
Hide thumbs

Advertisement

6. Press OK to confirm the selected quality and go back to the previous menu.
Press menu to return to live mode.
7. Note: You can press the MENU button anytime during setting to cancel the
selection and go back to the previous menu
Choose Auto Off
5 seconds
10 seconds
To conserve power, the IntelliCorder will
automatically go to stand-by mode
whenever it detects no motion in RECORD or LIVE
mode, or remains idle in PLAY mode.
1. Set MODE switch to LIVE while the LCD is ON
2. Press MENU button to enter Menu mode
3. Use 
4. Press OK to enter the setting mode
5. Use
6. Press OK to confirm the selected quality and go back to the previous menu.
Press menu to return to live mode.
7. Note: You can press the MENU button anytime during setting to cancel the
selection and go back to the previous menu
Enable/Disable Auto Delete
Auto Delete means that the three oldest index files are deleted when memory is full
Enable Auto Delete
Disable Auto Delete
to move to Setup
to select 5 seconds or 10 seconds
22

Advertisement

loading