Download  Print this page

GE SmartHome Series User Manual page 21

Intellicorder camera system
Hide thumbs

Advertisement

Adjust White Balance
White balance adjustment can make subjects look washed out or it can allow
more natural color balance for video recording. Normally, white balance is
automatically adjusted. You can obtain different results by adjusting the white
balance manually to fit your actual living environment.
Auto
Sunlight
Cloudy
Fluorescent
Tungsten
1. Set MODE switch to LIVE while the LCD is on.
2. Press MENU button to enter Menu mode
3. Use 
4. Press OK to enter the setting mode
5. Use
 to move to your desired effect (Auto, Sunlight, Cloudy,
Fluorescent or Tungsten)
6. Press OK to confirm the selected quality and go back to the previous menu.
Press menu to return to live mode.
7. Note: You can press the MENU button anytime during setting to cancel the
selection and go back to the previous menu
Exposure Valve Setup
>0 Brighter/ Exposure longer
=0 Standard/ Exposure normal
<0 Dimmer/ Exposure shorter
1. Set MODE switch to LIVE with the LCD is on.
2. Press MENU button to enter Menu mode
3. Use 
4. Press OK to enter the setting mode
5. Use  to increase or  to decrease EV value
to move to White Balance (AWB)
to move to EV Setup
Adjust
21
E V
0.0
-2.0
0
.
2.0

Advertisement

loading