Download  Print this page

GE SmartHome Series User Manual page 16

Intellicorder camera system
Hide thumbs

Advertisement

PIR Sensor activation may not occur when:
• Motion is very slow or very fast.
• Moving object is very small.
• Motion occurs only in 1 corner of viewing area.
Note: The PIR sensor will not detect motion through a glass storm door, screen
door or metal gate.
Sensor Trigger Capture
White Balance
A
Auto
Sunny
Fluorescent
Tungsten
Cloudy
Video Quality
FINE
640x480 @ 15fps
SP
320x240 @ 30fps
LP
320x240 @ 15fps
Record Status
Capturing Triggered
by PIR sensor
EV Enabled
+
-
Set Clock
The clock time is lost
in last power off
Motion-Activation in LIVE mode setting
In this mode setting, the IntelliCorder can monitor video and audio of visitors/
intruders at your front or back door.
+
-
01/01/2005
12:00 AM
1:20
16
Auto Delete Enable
Battery Status
Full Power Level
66% Power Level
33% Power Level
Empty
SD card Status
Present and Valid
Present but Locked
Clock Info/Stamp Mode
Clock Record Elapsed Time/
Remain Time/ Stamp Mode

Advertisement

loading