Table of Contents
Advertisement
3. Feed the ribbon cable through the mounting hole of the mounting bracket.
Position the Mounting Bracket over the peep hole opening on the inside of
your door.
4. Feed the ribbon cable through the support tube. Place the Support tube through
the Mounting Bracket into the peep hole and screw onto the PIR tube . Use the
Adjustment Tool to turn the Support tube clockwise until the mounting plate is
secured to the door. Take care not to overtighten the Support Tube.
5. Connect the ribbon cable plug to the INPUT Connector by matching the arrow
symbols on the plug and the terminal.
Caution
Do not rotate the camera or
recorder without disconnecting
the ribbon cable first. Damage to
the ribbon cable will occur and
void the warranty.
12
Advertisement
Table of Contents
