Esc/Pos Mode Commands (Tm-290 Emulation) - Star Micronics SLIP SP298 SERIES Programmer's Manual
Slip printer
Hide thumbs
Also See for SLIP SP298 SERIES:
- User manual (144 pages) ,
- Brochure & specs (32 pages) ,
- Specifications (2 pages)
Table of Contents
Advertisement
28
ESC/POS Mode Commands (TM-290 emulation)
The following table lists the TM-290 emulation commands that are supported
by this printer.
Control Codes
<HT>
<LF>
<FF>
<ESC> SP
<ESC> !
<ESC>#
<ESC> *
<ESC> 2
<ESC> 3
<ESC> @
<ESC> D
<ESC> M
<ESC> P
*1: n/60-inch line spacing and paper feed commands:
Since the minimum paper feed pitch for this printer is 1/144 inch, n/60 inch can
considered an approximate value. However, the actual value is INT ((6n/5) +
0.5)/72 inch.
Hexadecimal
Codes
09
0A
0C
1B 20
1B 21
1B 23
1B 2A
1B 32
1B 33
1B 40
1B 44
1B 4D
1B 50
Horizontal tab
Line feed
Paper eject in single sheet mode
Sets size of space to right of character
Enables batch print mode
Sets memory switch
Selects bit image mode
Selects 1/6-inch line spacing
Selects approximate n/60-inch line spacing *1
Initializes the printer
Sets horizontal tab position
Selects the 7 9 font
Selects the 5 9 font
Function
Advertisement
Table of Contents
