Star Micronics SLIP SP298 SERIES Programmer's Manual page 33

30
Character Selection
CODE
HEX
FUNCTION
CODE
HEX
FUNCTION
CODE
HEX
FUNCTION
<ESC> "R"
1B 52
Selects international character set
Selects an international character set according to the value of n, as
shown below:
0 n 12, "0"
n = 0, "0" : U.S.A.
3, "3" : England
6, "6" : Italy
9, "9" : Norway
12, "C" : Latin America
Although the international character set can also be selected using a
memory switch, the control code setting is given priority.
<ESC> "/"
1B 2F
Selects zero style
Causes subsequent zero characters to be printed with a slash when n
is 1, and without a slash when n is 0.
The valve of n can be set to 0(00H) or "0"(30H), or 1(0H) or
"1"(31H).
The default may differ depending on the memory switch setting.
<ESC> <GS>
1B 1D
Selects the character code table
This function selects a character code table (as shown below).
The default settings follow the settings of the memory switch.
The range of n is: 0
n = (00)H : Normal
(02)H : katakana
(04)H : code page 858
(06)H : code page 860
(08)H : code page 863
(0A)H : code page 866
n
n
n "9", "A" n
1, "1" : France
4, "4" : Denmark
7, "7" : Spain
10, "A" : Denmark 2
n
n
"t" n
74 n
n 10
"C"
2, "2" : Germany
5, "5" : Sweden
8, "8" : Japan
"B" : Spain 2
(01)H : code page 437
(03)H : code page 437
(05)H : code page 852
(07)H : code page 861
(09)H : code page 865