Star Micronics SLIP SP298 SERIES Programmer's Manual page 42

CODE
HEX
FUNCTION
<ESC> <GS>
1B 1D
This function specifies a position alignment.
This function aligns the specified position of all print data of 1 line.
The position is aligned as shown below.
n = (00)H, "0": Left align (default)
= (01)H, "1": Center
= (02)H, "2": Right align
ABC
ABCD <ESC><GS> "a"0
ABCDE
<ESC><GS> "a"1
Note:
• This is only valid when it is input at the start of the line.
• The position alignment is executed on the width of the specified
print area.
• The parts that are skipped because of horizontal tabs are also
included in the data for position alignment.
"a" n
61 n
ABC
ABCD
ABCDE
<ESC><GS> "a"2
39
ABC
ABCD
ABCDE