Star Micronics SLIP SP298 SERIES Programmer's Manual page 40

CODE
HEX
FUNCTION
CODE
HEX
FUNCTION
CODE
HEX
FUNCTION
CODE
HEX
FUNCTION
<ESC> "J"
1B 4A
One time n/72-inch feed
Performs a line feed of n/72-inch only once after printing the data in
the line buffer. The space setting for lines does not change. The value
of n is between 1 and 255.
<ESC> "j"
1B 6A
One time n/72-inch backfeed
Performs a line feed of n/72-inch only once after printing the data in
the line buffer. The space setting for lines do not change. The value
of n is between 1 and 255.
<ESC> "3"
1B 33
Sets line spacing to n/216-inch
Sets the subsequent line spacing to n/216-inch.
The value of n is between 1 and 255.
Since the min. pitch of the slip paper feed mechanism is 1/144-inch,
the set value is approximated by the following formula
INT (n 2/3 + 0.5)/144 inch
<ESC> "y"
1B 79
Sets line spacing to n/144-inch
Sets the subsequent line spacing to n/144-inch.
The value of n is between 1 and 255.
n
n
n
n
n
n
n
n
37